Antioxidant KY 616
Polymerization PVC & Thermoplastics Rubber
Company
Jiangsu Feiya Chemical Corporation Co. Ltd Products
Description
Butylated reaction products of p-cresol and dicyclopentadiene Antioxidant 616 is a highly effective polyphenolic additive with high activity and very low volatility
Benefit / Application
Antioxidant 616 is non-discolouring and non-pinking. Antioxidant 616 is especially recommended for the protection of natural and synthetic polymers based on isoprene and butadiene chemistry. Antioxidant 616 is ideally suited for the protection of light coloured, non-staining goods derived from natural rubber and latex, SBR and carboxylated SBR latices, ABS, NBR, BR, SBS and SIS in applications where the retention of appearance and elastic properties during storage and use are important requirements.
Used In
Moulded, Extruded, Calendered
Antioxidant KY 405
Company
Jiangsu Feiya Chemical Corporation Co. Ltd Products
Description
4,4-Bis(alpha,alpha-dimethylbenzyl)diphenylamine An amine type antioxidant which is relatively non-discoloring and effective against heat deterioration of NR and synthetic rubbers such as EP, EPDM & CR
Benefit / Application
It exibits excellent heat resistant effect for nylon 6, ABS resins, polyolefins, synthetic lubricant oil, polyether polyols, and hot-melt adhesives
Used In
Moulded, Extruded, Calendered
Antioxidant KY 86
Company
Jiangsu Feiya Chemical Corporation Co. Ltd Products
Description
Reaction product of Diphenlylamine and Alpha-Methyl Styrene Antioxidant KY-86 is antidegradant for universal application especially for rubber goods based on CR as well as on NR,IR,BR.SBR.NBR.EPDM and their combinations
Benefit / Application
It protects effectively and for a long time against influences of oxygen,heat and dynamic fatigue action. It provides also good protection against rubber poisons. The vulcanizates are being coloured by light influence just very slightly,therefore it is possible to use it in light compounds. It does not cause contact colouring. KY-86 does not bloom even at high dosage. It does not influence the basic physico-mechanical properties of vulcanizates. Its volatility is very low. Antidegradation effectiveness can be significantly increased by combination with imidazoles,phenols or phosphites(heat and thermo-oxidative resistance)or p-phenylenediamines(ozone resistance). KY-86 is also applicable as stabilizer for plastics,lubricants,oils and other substrates
Used In
Moulded, Extruded, Calendered
Antioxidant 1010
Company
Jiangsu Feiya Chemical Corporation Co. Ltd Products
Description
Pentaerythrityle Tetrak-is[β--(3.5 di tert butyl 4 hydroxyphenyl) propionate] The product is white crystalline powder, soluble in such organic solvents as benzene, toluene, chloroform and so on, slightly soluble in alcohol, but insoluble in water.
Benefit / Application
The product is the typical representative of hindered phenol antioxidants, non poisonous, nondiscolouring as well as nonstaining and is an excellent top quality approved in international market. It is widely used in a variety of polymer materials, such as polypropylene, polyethylene, polyester, polyurethane, polystyrene, polyxymethylene, PBT, ABS, polyamide, synthetic rubber and so on. It is also a high grade antioxidant for natural and synthetic oil.
Used In
Moulded, Extruded, Calendered
Loxiol G 70 S
Company
Emery Oleochemical Products
Description
Solid, high molecular, multi-functional fatty acid ester (complex ester)
Benefit / Application
For PVC External lubricant with an optimal release effect and a lower dosage than of the products LOXIOL G 70 and LOXIOL P 621, Suitable in particular for the manufacture of highly transparent films For other plastics, By adding 0.2 to 5 % LOXIOL G 70 S to thermoplastic polyurethane, it is possible to release the moulded parts at a higher temperature without adhesion or sticking, which leads to an increase in productivity.
Used In
Moulded, Extruded, Calendered
